Products
Products
• Outstanding Features of FLEXTECH Seismic Separation Joint – G Type
· Designed for large-diameter seismic separation joints of 400A and above
(suitable for power plants)
· Engineered to absorb and control displacement caused by pipe torsion resulting from seismic vibrations
· Available in various product types with modification design capability tailored to installation conditions
Operating Conditions |
| Operation Pressure: 175psi, 300psi |
| Norminal Diameter: DN25(1")~DN600(24") |
| Design Temperature: -40℃~+350℃ |
| Movement: ±XYZ 50mm~300mm |
| Flange Rating: 10K(#150), 20K(#300) |
Seismic Test : ASME B31.1 |
Structure & Materials |
| Connection Type: Flange, Groove, Weld End |
| Bellows Material: STS304,STS316L,Inco.625 |
| Braid Material: STS304 Wire |
| Flange Material : STS304 / Carbon Steel |
| Elbow & Turn Material: STS304/Carbon Steel |
Paint : Powder Coating (Powder Coating) |
• FLEXTECH SSJ175G / SSJ300G
* When installing the Gimbal Type Seismic Separation Joint, an anchor (or a four-directional brace capable of sufficiently withstanding thrust force) must be installed within 1.8 meters from both connection ends of the piping.
* The Gimbal Type Seismic Separation Joint is provided with site-specific modifications; therefore, separate consultation is required at the time of order.
G TYPE
• Outstanding Features of FLEXTECH Seismic Separation Joint – G Type
· Designed for large-diameter seismic separation joints of 400A and above (suitable for power plants, refineries, and similar facilities)
· Engineered to absorb and control displacement caused by pipe torsion resulting from seismic vibrations
· Available in various product types with modification design capability tailored to installation conditions
Operating Conditions |
| 1. Operation Pressure: 175psi, 300psi |
| 2. Norminal Diameter: DN25(1")~DN600(24") |
| 3. Design Temperature: -40℃~+350℃ |
| 4. Movement: ±XYZ 50mm~300mm |
| 5. Flange Rating: 10K(#150), 20K(#300) |
6. Seismic Test : ASME B31.1 |
Structure & Materials |
| 1. Connection Type: Flange, Groove, Weld End,etc |
| 2. Bellows Material: STS304, STS316L, Inco.625,etc |
| 3. Braid Material: STS304 Wire |
| 4. Flange Material : STS304 / Carbon Steel |
| 5. Elbow & Turn Material: STS304 / Carbon Steel |
6. Paint : Powder Coating (Powder Coating) |
• FLEXTECH SSJ175G / SSJ300G
* When installing the Gimbal Type Seismic Separation Joint, an anchor (or a four-directional brace capable of sufficiently withstanding thrust force) must be installed within 1.8 meters from both connection ends of the piping.
* The Gimbal Type Seismic Separation Joint is provided with site-specific modifications; therefore, separate consultation is required at the time of order.
9 Cheomdan-ro 181beonan-gil, Danwon-gu, Ansan-si, Gyeonggi-do, Republic of Korea
TEL.031-499-0991 l FAX. 031-499-0993
EMAIL: sales@onlyflexone.com l info@onlyflexone.com
All content on this website is protected under copyright law. Unauthorized reproduction, distribution, or modification is strictly prohibited, and violations may result in legal liability in accordance with applicable copyright laws. Copyright ©2026, SEUNGJIN IND.CO.,LTD
